Aspire Starter BVC Kit 900mAh

Aspire Starter Kit 900mAh

Product Introduction

The Aspire starter kit comes with an Aspire G-Power 900mAh battery and a fresh K1 glassomizer. K1 glassomizer: The K1 is a new generation of glassomizer, which uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids. The stainless steel drip tip and the pyre glass give the K1 a strong metallic impression, which makes it look very exquisite and high-end. This unique design also makes it easy to carry, install and refill.

Parameters

K1 glassomizer
Capacity: 1.5ml
Length x Diameter: 72mm x 14.8mm
Suitable voltage: 3.0V~4.2V
Resistance: 1.6ohm

Battery

Capacity: 900mAh
Output Voltage: 4.2V full power output
Length x Diameter: 77mm x 14.8mm

The kit comes with

• 1 x Aspire CF G-Power 900mAh
• 1x Aspire K1 glassomizer 1.5ml
• 6 x Replacement 1.6ohm BVC atomizer coils (1 pc pre-installed)
• 1 x USB charger
• 1 x A/C adaptor
• 1 x User manual

Features

1. Pyrex glass tube with 1.8ml capicity
2. BVC (Bottom Vertical Coil)
3. Stainless Steel Parts
4. Metal Button
5. Carbon Fiber Coated Tube.
6. Spring Connector
7. The battery bottom comes with a safe hole design
8. High Quality Cell and Control Circuit
9. 5pcs extra replacement BVC atomizer coils

How to use

1. Screw the G-Power battery into the K1 glassomizer.

2. Push the button on the battery (press 5 times in succession to turn ON/OFF), the LED will blink 3 times and the button will illuminate blue when active and ON. Press the LED button and inhale at the same time. Release the button after inhaling. The light indicates it is working.

How to fill in e-liquid

1. Turn upside down the cartomizer, and then screw off the bottom hardware.

2. Use the syringer or dropper to fill less than 1.5ml e-liquid into the space between the glass tank and the center metal tube. Do not overfill it.

3. Carefully screw on the bottom hardware, connect it with the battery and enjoy it.

How to replace the coil unit/coil head

Turn upside down the cartomizer, and then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!

How to charge the battery

Unscrew the battery from the vaping components and gently screw the battery into the dedicated USB charger provided in the kit. Plug the USB into the supplied A/C adaptor or computer. The battery will flash 3 times and then turn solid in color (Orange light in 3.2~3.5V, Blue light in 3.5V~ 4.15V). The light on the USB charger will be red when charging. It takes about 3 hours for the battery to charge. Once fully charged, the USB charger will display a green light and the LED light on battery will turn off.