Joyetech eGo AIO V2 Starter Kit 1700mAh

Joyetech eGo AIO V2 Starter Kit 1700mAh

Product introduction

The Joyetech eGo AIO 2 (all in one) is an e-cigarette in the form of an all in one solution. With this vape pen, you don’t have to think about any settings as everything is set automatically from the start.
This vape unit is backwards compatible with eGo AIO coils and Cubis BF coils, so you have the option of choosing between 5 different coils.

Also, Joyetech AIO v2 has a led light in the tank to make it more personal. When the device is off, just hold the button for a moment to change to the color that suits you best. You can choose between red, yellow, green, blue, indigo, white or purple.

Here’s how to get started (Usage guide)

Quick start

1. Fill the tank, let stand for 10 minutes.
2. Click the button 5 times quickly to start it.
3. Start inhaling and then hold the button to vape.
4. It comes with a USB-C cable for charging and we recommend charging it fully before first use.

Start/stop

Quickly click the fire button five times to turn the device on or off. The button flashes 5 times at startup.

Firing & inhalation

Make sure your e-cigarette is turned on and there is e-juice in the tank. By getting into the routine of doing the following steps in this order, there is less risk of the coil becoming overheated:
Start inhaling, hold the button for 2-3 seconds, release the button and stop inhaling.

Refilling of e-juice

Press down on the top cover and turn counter-clockwise to unscrew it. If this is the first time the burner/coil is used, we recommend that you drop some e-juice on the visible cotton of the coil and double check that it is screwed on. Fill up with e-juice so that the liquid reaches the maximum mark (about half of the tank). Leave for at least 10 minutes on first use.

Coil replacement

You replace the coil when the taste does not feel as good or if the cotton has been burnt due to dry fireing. Press the top cover down and turn it counterclockwise. Unscrew the coil and install a new one. Then follow the instructions above on how to top up with e-juice when using a new coil. Screw the top cover back on.

You can find coils for the Joyetech eGo AIO 2 here.

Battery level

Joyetech eGo AIO 2 now also comes with extended color indicators to show battery level – the LED indicator shows the battery life in seven colors from high to low battery: green, turquoise, blue, white, yellow, purple and red.

Charging with USB-C

The battery has a capacity of 1700mAh, which is enough for about 1-2 days with normal use. When the battery needs to be charged, there is a USB-C port on the e-cigarette, which you plug the included cable into. With passthrough technology, you can use it while it is being charged.
The device needs to be charged with a maximum of one 1A Adapter (Sold separately)

Child lock, less leakage and safety protection

The tank has a child lock that prevents children from accessing the e-juice in the tank. The nozzle (drip tip) is spiral-shaped on the inside so that condensation does not rise as easily. In addition to child lock & less leakage, Joyetech AIO 2 has safety features such as protection against overcharging, short circuit, overheating and discharge.

Built-in tank with 2ml e-liquid capacity

The built-in tank has a 2ml liquid capacity. It is suitable for both mouth-to-lung (MTL) and restractive-direct-lung (RDL). When you need to change the coil/burner, you need BF Joyetech BF Coils. You can find them here.

Recommended VG/PG ratio for the 0.8 ohm coils included is at least 50PG.

Easily adjustable airflow

The airflow is adjusted by turning the top and determines how much air resistance you want. Easily adapt to your own needs.

It comes with

1x eGo AIO 2 battery
2x BFC 0.8 ohm coils
1x eGo AIO 2 nozzle
1x USB-C cable
1x User manual
1x Warranty certificate