SMOK Spirals Tank

SMOK Spirals is a 22mm diameter with built-in large size coil head adopts Japan imported cotton, brand new coil and precise wicking hole. Together with adjustable small size air slots and elongated drip tip, all that makes it to be a taste whirlwind that offers you authentic, powerful and charming taste. The Spirals tank brings your impressive experience.

Parameters
Size: 22 x 48mm
Capacity: 2ml
Material: SS
Thread: 510

It comes with
1 x Spirals Tank
1 x 0.6ohm dual core (pre-installed)
1 x 0.3ohm dual core
1 x RBA coil (single coil deck)
1 x Replacement glass tube
1 x User Manual
Spare parts

22mm diameter
New large coil head
Adjustable small size air slots
Elongated delrin drip tip
Top filling system

How to fill e-Juice:
1. Hold the tank with one hand, and use another one to press top cap and move it clockwise.
2. Add e-liquid through the slot, and pay attention not to drip in the central airflow;
3. Close the cap carefully and firmly. Then let it stands for several minutes to get the organic cotton completely saturated.

How to build the RBA:
1. Before starting make sure your hands are clean.
2. Taking RBA deck apart.
3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.
5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.