WISMEC Reuleaux RXmini 80W TC MOD

WISMEC Reuleaux RXmini 80W TC MOD

Product introduction

WISMEC Reuleaux RXmini MOD Kit, designed by JayBo, is a powerful box mod with 80W max output. It features compact size, 2100mAh built-in battery, upgradeable firmware with preheat function. It is a great device for daily use. The Rxmini MOD is compatible with most 510 thread tanks.

Parameters

RXmini MOD
Size: 44.5 x 35.5 x 58
Battery capacity: 2100mAh
Battery chip type: 16400×3
Output mode: VW/BYPASS/TC-Ni/TC-Ti/TC-SS/TCR
Output wattage: 1-80W
Temp range: 100-315C/200-600F
Resistance range: 0.05-1.5ohm (TC); 0.1-3.5ohm (VW/BYPASS)
Screen: 0.96-inch display
Thread: spring-loaded 510 thread
Color: Grey

It comes with

• 1 x Reuleaux RXmini 80W MOD
• 1 x USB cable
• 1 x Sticker
• 1 x User Manual
• 1 x Anti-fake sticker

Features

Designed by JayBo
Compact size and good portability
80w max ouput and 2100mAh built-in battery
Upgradeable firmware with preheat function

Operation Guide

Power on/off: Press the power button 5 times in quick succession to turn the device on and off.

Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.

Key lock function: While the device is on, simultaneously press the ” ” “-” buttons. This will switch between Key lock and Key unlock function.

Micro UBS port function:The USB port can be used for charging and upgrading firmware.

Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees.

Shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR modes: Press the fire button 3 times, the mode indication will flash to indicate you enter into the menu. Press the right regulatory button to switch between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR modes. Press the fire button or leave the display to flash 10 times on current setting to confirm and exit the menu.

Logo mode: When powered on, press the fire button and right regulatory button simultaneously and then you enter into the logo mode. By pressing the left and right regulatory button to choose between logo on and off, and press the fire button to confirm.

Preheat function:
1. Long press the fire button and right regulatory button simultaneously to enter the menu.
2. Press the right regulatory button to enter the preheat setting menu.
3. Press the fire button to switch between preheat power and preheat duration.
4. Press the left or right regulatory button to decrease or increae the parameter.
5. Long press the fire button to confirm.