Eleaf iJust S Vape Starter Kit 3000mAh

Eleaf iJust S Vape Starter Kit 3000mAh

Product introduction

iJust S, a new iJust series starter kit, has a large iJust S battery with 24.5mm diameter & 3000mAh capacity as well as a 4ml iJust S atomizer. All parts of the iJust S atomizer can be detached and reassembled, bringing much more convenience in cleaning and maintenance. The e-juice can be refilled by removing the top cap only with ease. When used with new ECL 0.18ohm Head, the iJust S will bring you a different vaping experience with nice flavor.

Eleaf iJust S Parameters

Diameter: 24.5mm
Height: 139.0mm
Battery capacity: 3000mAh
Battery cell type: 23600
E-juice capacity: 4mL
Resistance: 0.15 -3.5ohm
Thread type: 510 thread
Color: 7 clors

iJust S Kit comes with

• 1 x iJust S Battery
• 1 x iJust S Atomizer (with EC 0.3ohm Head)
• 1 x EC 0.5ohm Head
• 1 x ECL 0.18ohm Head
• 1 x USB Cable
• 1 x Airflow Control Ring

Eleaf iJust S Kit Features

• Top e-Juice Filling
• New ECL 0.18ohm Head
• Dual Circuit Protection
• 3000mAh battery & 4ml e-Juice capacity
• Detachable Structure for Convenient Cleaning
• Direct output voltage
• Dual circuit protection

Eleaf iJust S Operations Guide

E-liquid Filling: The e-juice can easily be refilled by removing the top cap only.

Note:
1. Please don’t fill e-juice into the air pipe.
2. Please don’t overfill and make sure the e-juice level is between 10%-90%.
3. Please first drip a few drops of e-juice directly into the coil to make it fully saturated before first use.

Air Inflow Adjustment: The amount of air inflow can be easily adjusted by the silicone airflow control ring so as to get different vaping experiences.

Power On/Off: Press the fire button 5 times in quick succession within 2s. The white button light will flash 5 time to show the device is turned on/off.

Vaping: Long press the button to take a puff

Charging: Charge the device by connecting it with wall adapter or computer via USB cable. The button light will turn red when the device is charging and the light will go out once fully charged. It takes around 4 hours to fully charge the battery with 1A wall adapter.

Atomizer Protection: When vaping time exceeds 15s, the device will shut off automatically with the white button light flashing 10 times.

No Atomizer Protection: The white button light will flash slowly when the button is pressed down without atomizer connected.

Short-circuit Protection: Short-circuit occurs with the white button light flashing three times.

Low-voltage Protection: When the voltage of the device is below 3.3V, the white button light will flash 40 times. To power the device on please charge the device.

Battery Level Indication Function

Battery Level    Light Condition
60% – 100%      Stay lit
30% – 59%      Slowly flashes
10% – 29%     Moderately flashes
0 – 9%         Frequently flash