Eleaf iStick QC 200W Box Mod

The iStick QC 200W comes with a massive 5000mAh built-in battery and has a powerful 50A/200W maximum output. Stylish, sustainable and powerful, the iStick QC 200W also features a cell balancing trickle charge system and a 1.5A quick charge capability when using the Avatar Quick Charger. The innovative RC adapter (optional accessory) will convert the iStick QC 200Ws 510 connection into a USB output for Power bank mode when necessary.

Battery capacity: 5000mAh;
Thread type: 510 thread;
Output wattage: 1~200W;
Weight: 195g;
Output voltage: 0.5~9V;
Maximum charging current: 1.5A;
Maximum output current: 50A;
Output mode: VW / Smart / TC (Ni, Ti, SS, TCR-M1, M2, M3);
Resistance range: 0.05~1.5 ohm (TC modes) / 0.1~3.5 ohm (VW / Smart mode);
Temperature range: 100~315’C / 200~600’F (TC modes);

200W Maximum Output Power for Cloud Chasing:
The iStick QC 200W is capable of outputting a maximum output power of 200W, providing a huge power for cloud chasing.
Long-lasting Battery Life:
The iStick QC 200W comes with a massive 5000mAh built-in battery, which will last you a rather long time of vaping.
200W with internal battery:
The iStick QC 200W has three internal batteries connected in series to provide much steadier output power.
1.5A maximum charging current for quick change:
With 1.5A maximum charging current, the iStick QC 200W can be fully charged much more quickly when using the Avatar quick charger (optional accessory);

Featuring the Cell Balancing Trickle Charge System:
A cell balancing trickle charge system is adopted in the iStick QC 200W to bring the internal batteries to the equal level charge, which also ensures high security in charging.

Preheat Function & Different Switchable Interfaces
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. The iStick QC 200W also has four switchable display interfaces, allowing you to choose the interface you are most accustomed to.

High Compatibility:
With a width of 25mm, the iStick QC 200W can handle all tanks up to 25mm diameter without any overhang.

Dual Circuit Protection:
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.

Functions of Micro USB Port
Charging: simply plug the iStick QC 200W in to a computer or a wall adapter to charge.
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

Capable of serving as a power bank:
With the Reverse Charging (“RC”) adapter (optional accessory), the iStick QC 200W will convert the 510 connection into a USB output for power bank mode, providing power to your cell phone or other e-cig device.

Reset Function:
The iStick QC 200W can be reset in case it could not be powered on after upgraded.